ATTENUATORS
BULLETS
CABLE CONNECTORS
EDGE LAUNCH
FLANGE MOUNT
HERMETIC SHROUDS
PCB MOUNT
PRESS-IN SHROUDS
SURFACE MOUNT
TERMINATIONS
THREAD-IN SHROUDS TOOLS
MMSP DATA SHEET
 |
| The
MMSP interface is compliant with the SMP series per MIL-STD-248. MMSP connectors are compatible and intermateable with GPO™ connectors |
||
| MATERIALS AND FINISHES Center Contacts and Bodies: Beryllium copper per ASTM B196 and/or B197, Gold plate per MIL-G-45204, Type 1, Grade C, Class 1 over nickel plate Dielectrics: PTFE per ASTM D1710, Type 1, Grade 1, Class A Standard Shrouds: Stainless steel per ASTM A582, Passivated per AMS-QQ-P-35 Hermetic Housing and Shrouds: Kovar per ASTM F15 sealed with Corning 7070 glass ELECTRICAL Impedance: 50 ohms nominal Frequency Range: DC to 50 GHz Operating Temperature: -65°C to +165°C Corona Level: 190 VRMS @ 70,000 ft. Dielectric Withstanding Voltage: 500 VRMS @ sea level 125 VRMS @ 70,000 ft. Isulation Resistance: 5,000 megohms minimum RF High Potential: 325 VRMS @ 5 MHz Contact Resistance: Center Conducter 6.0 milliohms max Outer conducter 2.0 milliohms max Insertion Loss: .001 + .01565 * √ƒ(GHz) dB max RF Leakage: -80 dB maximum to 3 GHz -65 dB maximum from 3 GHz to 26.5 GHz VSWR: reference plane to reference plane (fully mated) DC to 23 GHz - 1.10:1 max (1.05:1 Typical) 23 to 26.5 GHz - 1.15:1 max (1.06:1 Typical) 26.5 to 40 GHz - 1.30:1 max (1.08:1 Typical) 40 to 50 GHz - 1.30:1 max (1.09:1 Typical) |
MECHANICAL Durability: 100 cycles min. into a full detent shroud 500 cycles min. into a limited detent shroud 1000 cycles min. into a smooth bore shroud Force to Engage: MMSP Full Detent - 15.0 lbs. max MMSP Limited Detent - 10.0 lbs. max MMSP Smooth Bore - 2.0 lbs. max Force to Disengage: MMSP Full Detent - 5.0 lbs. min MMSP Limited Detent - 2.0 lbs. min MMSP Smooth Bore - 0.5 lbs. min Radial Misalignment (pre-engage): .010" centerline to centerline (.020" available with special shrouds) Axial Misalignment: 0 to .010" ENVIROMENTAL CHARACTERISTICS Corrosion: MIL-STD-202, method 101, condition B Vibration: MIL-STD-202, method 204, condition C; 15 G's Shock: MIL-STD-202, method 213, condition F; 1500 G's Thermal Shock: MIL-STD-202, method 107, condition B-3 Moisture Resistance: MIL-PRF-39012 para. 3.21 NOTE: Electrical Performance listed above is for Micro-Mode female-to-female "bullet" part number MMSP-2500. Performance on other configurations may vary. Contact factory for additional information. 
|
|
| Click here to download a pdf copy of the MMSP data sheet. | ||
| GPO® is a registered trademark of Corning Gilbert Inc. | ||
